Logic Controls support site

Use this link to fix issue and follow steps 

https://logiccontrols.com/wp-content/uploads/2020/02/zip/Line_Display_Command_Set_Utility.zip 

1. Utilities:

   DnloadCSF.exe

        - Download command set file to display.

   SetSerialPort.exe

        - Set baud rate for serial port, enable/disable PASS-THRU feature.

   SelCmdLciGp.exe

        - Select command set in LCIGP (LCI command set group).

        - LCIGP command group include the following command sets:

             LCI. ( if you never made any changes, LCI is the default setting)

             AEDEX

             NORITAKI

             LCI3400

             UTC1100(SD)

             UTC1100(EN)

             UTC220XLT

             EPSON110-D202

2. Command set files:

   LCIGP_xxx.c9f - Logic Controls command group

   EMAX_xxx.c9f - Emax command, version V1.28

   Firich_xxx.c9f - Firich command

   IEE_xxx.c9f - Iee command

   PTC_xxx.c9f - PartnerTech CD7220/5220 command

3. The utility file, and firmware files <*.c9f> must be in the same folder.