To add a logo, please save the image as a .bmp file (please make sure the file size is smaller than 100MB), then follow the steps below:
1. Download our LR2000 configuration tool from this link: https://we.tl/t-pqYGRzhiAJ
2. Open up the application once downloaded, and click on 'Add' to add the image.
3. Select the new logo you just added under Logo List, and click Download.
4. Next go to the printer properties for the LR2000.
5. Go to the Device Settings tab.
6. Select one of the options for the NVLogo print before or printer after.
7. Select NV Logo 1
8. Click Ok
Download the configuration utility here: https://logic-controls.s3.us-west-2.amazonaws.com/LR2000_ConfigurationTool.zip
Steven Rolon
To add a logo, please save the image as a .bmp file (please make sure the file size is smaller than 100MB), then follow the steps below:
1. Download our LR2000 configuration tool from this link: https://we.tl/t-pqYGRzhiAJ
2. Open up the application once downloaded, and click on 'Add' to add the image.
3. Select the new logo you just added under Logo List, and click Download.
4. Next go to the printer properties for the LR2000.
5. Go to the Device Settings tab.
6. Select one of the options for the NVLogo print before or printer after.
7. Select NV Logo 1
8. Click Ok