Começar um novo tópico

How to add a logo for the LR2000 printer

To add a logo, please save the image as a .bmp file (please make sure the file size is smaller than 100MB), then follow the steps below:


1. Download our LR2000 configuration tool from this link: https://logic-controls.s3.us-west-2.amazonaws.com/LR2000_ConfigurationTool.zip

2. Open up the application once downloaded, and click on 'Add' to add the image.



3. Select the new logo you just added under Logo List, and click Download.


4. Next go to the printer properties for the LR2000.


5. Go to the Device Settings tab.​


6. Select one of the options for the NVLogo print before or printer after.



7. Select NV Logo 1


8. Click Ok



Do make sure before following these steps you have downloaded the appropriate drivers for the LR2000.


OPOS Driver: https://logiccontrols.com/wp-content/uploads/2020/02/zip/LR2000_OPOS.zip


Linux Driver: https://logic-controls.s3.us-west-2.amazonaws.com/LR2000_Linux_Cups.zip


Entrar ou Registarpara publicar um comentário