Hardware Installation
Touch screen driver installation
For resistive touch versions, follow the driver installation and calibration steps below. For PCAP touch version, no driver installation/calibration is required.
Step 1: Navigate to the installer directory to find the setup.exe file. Double-click on “setup.exe” to start installation.
Step 2: When installation starts, click Next to proceed to the next step.
Step 3: Installation in progress
Step 4: Uncheck "Install PS/2 interface driver" and click Next to continue installati
Step 5: Check “install RS232 interface driver” and click [Next] to continue installation.
Step 6: Select option “NONE”, click [Next] to continue installation.
Step 7: When installing external USB touch monitor, please connect the USB controller and USB cable
Step 8: If there are additional touch monitors connected, please check “Support multi- monitor system”.
Step 9: Select the destination location to install the touch driver. The default path is “C: \ Program Files \ eGalaxtouch”. Click [Next] to continue installation.
Step 10: Select the Program Folder to install the utility. The default is “eGalaxtouch”. Click [Next] to continue installation.
Step 11: Check the option to create a desktop shortcut icon and click [Next] to finish the installation.
For more information visit: http://bematechus.com/wp-content/uploads/2015/12/SB9015T-User-Manual-v1.4.pdf
Drivers and Utilities for SB9015T-D525
- Audio(Windows XP)
- Audio(Windows Vista/7)
- Chipset(Windows xP/Vista/7)
- LAN(Windows XP)
- LAN(Windows Vista/7)
- VGA(Windows XP)
- VGA(Windows Vista/7) (64 Bit)
- OPOS (MSR)
- OPOS (VFD)
- OPOS (Cashdrawer)
- Touch Screen(Windows XP/Vista/7)
- Touch Screen(Windows 10)
- MSR Utility
Drivers and Utilities for SB9015T-I3