Installation guide for LE1015 touch monitor

HARDWARE INSTALLATION

1. Connect VGA cable from monitor to computer VGA port
2. Connect USB cable to computer USB port
3. Connect power cord to touch monitor
4. Plug power cord to wall AC power outlet

TOUCH SCREEN DRIVER INSTALLATION

1. Navigate to the CDROM or installation program directory to find the file
   setup.exe. Double-click on “setup.exe” to start installation.
2. When installation starts, click [Next] to proceed to the next step.
3. Installation in progress
4. Uncheck “Install PS/2 interface driver” and click [Next] to continue
   installation.
5. Uncheck “install RS232 interface driver” and click [Next] to continue
   installation.
6. Select option “NONE”, click [Next] to continue installation
7. If there are additional touch monitors connected, please check “Support
   multi- monitor system”.
8. Select the destination location to install the touch driver. The default path is
   “C:\Program Files\eGalaxtouch”. Click [Next] to continue installation.
9. Select the Program Folder to install the utility. The default is “eGalaxtouch”.
   Click [Next] to continue installation.
10. Check the option to create a desktop shortcut icon. Click [Next] to continue. After install the driver successfully, identify the USB controller is installed.
11. Click on "Settings" tab to change the touch function settings as needed.
12. If necessary, perform 4-point touch calibration and/or 9-point/25-point linearization.
13. Use Draw Test to check touch accuracy after calibration.

FOR MORE INFORMATION

For more information on the LE1015 touch monitor, go to: LE1015 User Manual

To download touch screen utilities, click For Windows 7/8/10 or for Windows 10