How to change LS6100 IP address


Start up the unit and immediately tap on the “del” button repeatedly until the bios screen shows.

Should the delete key not access the bios try to use either the F10, F2, F12, or F1 keys.



On the bios screen navigate to the option that says "Ethernet" where you will see options to set the ip address and subnet mask.


TCP port should be set to 8888 as default and is recommended to not change it.


Once IP address has been updated go to "Exit" and select "Exit and Save"



Once saved you should see the screen having updated as seen below.


Login or Signup to post a comment